Quantcast
Channel: SCN : Popular Discussions - SAP BW Powered by SAP HANA
Viewing all 811 articles
Browse latest View live

How to import BW BEx query in to Hana studio?

0
0

Hi,

 

Any idea on how to import BW Bex query into hana studio?

 

Has any one tried doing this ?  Is this possible?

 

I can able to import DSO's into hana studio but I couldn't find any option of importing bex queries.

 

Kindly share if you have any documents on how to leverage bex queries in hana studio.

 

Regards,

Antony Jerald.


ETL using Informatica 10 into BW 7.5 - DataSource creation BAPI error

0
0

Hi,

 

We have pretty latest environment and ran into this problem which seems to be a standard problem in BW 7.x versions while using Informatica as ETL tool.

 

We are on BW on HANA 7.5 SP1 and need to use Informatica PowerExchange 10 to load non SAP data into BW system. System does not let us create a Informatica type DataSource with below error message.

 

DataSource <ZINFA_ETL_TEST>(<Informatica>): Object type RSDS not supported in BAPI source system

 

Can someone help with any pointers if you ran into SAME problem.

 

Note - We are aware of 3.x process (using InfoSource for Informatica) and aren't looking for that. Attached is error message.

 

Thanks

Ashok

Request activation failed in aDSO - Where's the log

0
0

Hi,

 

We recently migrated to BW 7.4 on HANA SP13 and we started using Advanced DSOs. However, we are now facing a complex situation. It might be something silly but we haven't figured it out yet.

 

With classic DSOs, when a request activation failed due to junk data, you used to be able to be able to see the characteristic where it was failing and the problematic value. This was available on the Activation Log.

 

Now, with Advanced DSOs, we cannot see any of these details. We just get a message saying SID generation failed.

So, is there a way to identify the problematic characteristic and the problematic value in aDSOs? Has the DSO activation log been replaced or been put somewhere else? Do we need to look into HANA? If so, where?

 

Thanks in advance.

Planning Infocube in SAP BW on HANA 7.4 /7.5

0
0

Hello ! As we are moving towards aDSO (only persistency) Open ODS view and Composit Provider, what will happen to Planning Cube(real time cube) in case of IP & BPC. Please explain. Thank you. Ajay

authorization required to attempt checkout IQ_LOB license error in DAP Activation

0
0

Hi Guys!

 

Badly need your expertise on NLS.. We are trying to activate our Data Archiving Process but failed in error "SQLCode = -1,006,276: Authorization required to attempt checkout IQ_LOB license error in DAP Activation.

 

But IQ_LOB is optional in our Sybase IQ..

 

Why is it still checking on this parameter?

 

Hope someone knows this and be able to share what is the workaround or fix on this issue

 

Regards
,
jo

how to create RKF in BW modeling tools

0
0

Can we create RKF and CKF in eclipse  BW modeling tools ?

 

I dont see option  to create . I see only refresh option under info provider pane

 

BWMT.png

Not able to transport ADSO in SAP BW on HANA

0
0

Hi Champs,

 

We successfully moved a BW ADSO transport from Dev to QUA01 successfully and eventually to Production Box.

However We are trying to move a BW ADSO transport from Development to Quality02 as part of retrofit but ended with following errors.

This issue is prevailing since a month and really need your expertise at the earliest.

Thank you all

 

ADSO_Transport_Issue.PNG

URL for data preview is missing after create Composite provider

0
0

Hi experts,

 

 

After finish a Composite Provider  creation in Eclipse, I selected tab "Output"and then  the button "Show preview", but preview is not shown, instead I got the message "URL for data preview is missing!".

What is the URL requested and how is its configuration?

 

My system is BW on HANA 7.4 SP9.

 

Regards.

 

S. Gordon


Partitioned Info Cube error after migrating to BW on HANA

0
0

Hello Team,

Recently we have migrated our Dev BW system to HANA.

 

While doing data loads to partitioned Info Cube the data loadings are getting failed.

 

This is Error Message:

 

The error is Error occurred in write_ic for Data Target 0PS_C04

Errors Occurred in UPDATE_INFOCUBE for Data Target 0PS_C04.

If we remove the partitions then we are able to load data without any issues.

 

As this is only Technical Migration we are not converting any infocubes to Hana Optimized Info cubes and also some of the data flows among the failed Infocubes are in 3.x.

 

Question 1: What is the behavior of Standard Info Cube which have partitions and not converted to HANA Optimized in BW on HANA system ? Will the Info cube having same partitions as before after migrating to HANA data base?

 

Question 2: As i said earlier If i remove partition then data loadings are working fine. If this is the solution what would be the impact of queries runtime and will there be any other impacts such as transformations/update rules become in active etc..

 

Question 3: Another solution may be converting to HANA optmized which in turn deletes the partition while converting. But if i just convert info cubes to hana optimized which have 3.x flows we should also migrate data flows to 7.x flows . For info cubes which have already 7.x flows there will not be any impact if we migrate cubes to hana optmized.

 

Please suggest some feasible solution. Thanks in Advance

partition error.png

how to use HANA Calculation views with input parameters for creating ODS views or Composite providers?

0
0

Hi,

 

We want to use calculation views with input parameters in BW reporting. As per the current architecture, we are using ODS views and composite providers on top of which BEx queries and AO are used for reporting. For calculation views with input parameters, we are unable to create ODS views. Input parameters are not visible in ODS view.

 

when the calculation view is directly used in composite provider, we are unable to activate it as it is giving weird errors for rest of the fields. (data type mismatch even though it is a direct assignment without any IO association.)

 

Please let me know the way ahead here.

 

We are using SAP BW 7.4 SP8.

Thanks in advance.

Unable to delete data from aDSO in bw7.5

0
0

HI,

 

there is is failed request in yellow status in aDSO, unable to delete it, please suggest way out. We tried updating tables as well but no luck.

 

kindly advice.

CompositeProvider / Multiprovider modeling questions

0
0

Hello all,

I've got some modeling questions regarding CompositeProviders.  We don't have our HANA system installed yet and I haven't been able to prototype so I thought I would present my questions here.

 

The scenario I have is 2 DSO's from different source systems, and I want to harmonize on common master data and union the harmonized data. 

 

In non-HANA BW, I would use multiple layers of DSO's with transformations to do the harmonization and then infocubes within a Multiprovider for reporting. 

 

However, BW 7.3 and HANA has the CompositeProvider which allows performant joins, so instead of multiple layers of DSO's I can create a join between the source DSO and the master data conversion tables.  I would need to perform 2 joins on the 2 source DSO's, and then union the data.

 

I had thought that I would need to create 2 Composite Providers, each with a join, and then a Multiprovider that unioned the 2 CompositeProviders.  But I'm thinking that a single CompositeProvider can handle this modeling scenario.  I have not seen anywhere that a CompositeProvider can be used in a Multiprovider, but I'm thinking this isn't necessary.

 

Can anyone shed some light on this?

Thanks,

Bryan

Can SAP BW 7.31 run on HANA SP11 (latest version)?

0
0

Dear All,

 

I known HANA DB SP11 is related already.

Since we are going to migrate the existing HANA BW 7.31 to new HANA hardware.

 

I read 1600929 - SAP BW powered by SAP HANA DB: Information.

It didn't mention any about HANA SP11. it only mentioned SP10 as latest....wonder it is becos note not update or ....

 

PAM doc also no info about this...

https://support.sap.com/content/dam/library/ssp/infopages/pam-essentials/TIP/NW73xPAMBW.pdf

 

Productively used BW release

Recommended minimum HANA SP/Revision

7.30

Maintenance Revisions 69.0x or
Maintenance Revision 74.0x *) or
Revision 82 or higher (HANA SP08)
or Revision 96 or higher (HANA SP09)
or Revision 102 or higher (HANA SP10)

7.31

Maintenance Revisions 69.0x or
Maintenance Revision 74.0x *)
or Revision 82 or higher (HANA SP08)**)
or Revision 96 or higher (HANA SP09)
or Revision 102 or higher (HANA SP10)

SP02 <= 7.40 < SP05

Maintenance Revisions 69.0x or
Maintenance Revision 74.0x *)
or Revision 82 or higher (HANA SP08)
or Revision 96 or higher (HANA SP09)
or Revision 102 or higher (HANA SP10)

SP05 <= 7.40 < SP08

Maintenance Revision 74.0x
or Revision 82 or higher (HANA SP08)
or Revision 96 or higher (HANA SP09)
or Revision 102 or higher (HANA SP10)

7.40 >= SP08

Revision 83 or higher (HANA SP08)
or Revision 96 or higher (HANA SP09)
or Revision 102 or higher (HANA SP10)

7.40 >= SP10

This is a NetWeaver requirement, details can
be found in note 1914052
Revision 85 or higher (HANA SP08)
or Revision 96 or higher (HANA SP09)
or Revision 102 or higher (HANA SP10)

7.50

Revision 102 or higher (HANA SP10)

 

 

And standalone HANA DB can be restored from lower version to newer version.

So it apply to ERP and BW DB as well right? (i.e. no SAP upgrade - update software component SP level required)

 

Please advise, thanks

 

Regards

Curry

How from view in schema to IOBJ MD source?

0
0

I have located a view in schema SAPERP that I wish to use as source to an IOBJ MD.

 

This is the view:

Unbenannt.JPG

 

In the IOBJ maintenance: how do I go about locating the view in order to define it as the MD-source?

Unbenannt.JPG

SAP BW Powered by SAP HANA

0
0

Hi Experts,

 

After the migration from anydb to HANA db. How does the tables get stored in SAP HANA database? Row store or Column store?

 

Please help me out to be clear in this context.

 

Regards

Sami M


Adding BW Modelling plugins in HANA Studio

0
0

Hello Experts,

 

I installed SAP HANA Studio in my local machine (outside C:Program Files, i.e in  D Drive)

 

 

I followed 2 options to install BW Modelling Tools Plugin, both have been unsuccessful. Can some one please let me know what is missing.

I checked the pre-requisites mentioned in the installation document (http://help.sap.com/download/netweaver/bwmt/SAP_BW_Modeling_Tools_Installation_Guide_en.pdf) and my system has all the necessary ones.

 

Option 1

 

- Followed the instructions mentioned in the https://tools.hana.ondemand.com/

- HANA Studio --> Help --> Install New Software --> Provide the link https://tools.hana.ondemand.com/luna

- I get the below error

 

Unable to connect to repository https://tools.hana.ondemand.com/luna/content.xml

Connection to https://tools.hana.ondemand.com refused

 

Option 2

 

  - Download latest patch from Service market place

  - HANA Studio --> Help --> Install New Software --> Provide the Archive path

  - Error message I get is below,

 

Missing requirement: BW Core UI 1.6.3 (com.sap.bw.core.ui 1.6.3) requires 'bundle com.sap.adt.destinations.ui 2.18.0' but it could not be found

  Cannot satisfy dependency:

    From: BW DataStore UI 1.6.3 (com.sap.bw.datastore.ui 1.6.3)

    To: bundle com.sap.bw.core.ui 1.1.0

  Cannot satisfy dependency:

    From: BW DataStore Object 1.6.3 (com.sap.bw.feature.adso.feature.group 1.6.3)

    To: com.sap.bw.datastore.ui [1.6.3]

 

Thanks for providing some hints.

 

Regards,

Srinivas

How to find largest tables to verify data cleanups in BW on HANA

0
0

Hi Folks,

 

are there any reports/tools available that help to identify largest tables in BW on HANA?

We are looking for those to identify:

- Large PSA tables (-> forgotten/ not working PSA cleanup)

- Large Change Log tables (-> forgotten/ not working change log cleanup)

- Large Cube/DSO tables (-> forgotten/ not working cube/DSO cleanups)

 

In BW on Oracle we had a custom ABAP report that showed all PSA tables, No. of Requests, Size which was really helpful to identify issues for PSA and change logs.

 

In BW on HANA it will really hurt if a PSA staggers up to GBs occupying costly Memory ;-)

 

Thanks for all replies in advance,

Axel

BW Development Perspective in SAP HANA Studio of SAP BWoH 7.4 - Configuration Steps

0
0

Hi All,

 

Please could anyone share doc related to  BW Development Perspective configuration in SAP BWoH 7.4 with regards to SAP HANA Studio.....

 

We are trying to upgrade BW 7.3 to BW 7.4 and looking for help in configuring BW Development Perspective in SAP HANA Studio.....Thx in advance..

 

Message was edited by: Raja Sekhar Annam

Create field based DSO in BW 7.4

0
0

Hello,

We are using BW 74 sp7.

I read that in our version when creating a DSO there should be an option to create field-base DSO(as shown in this print screen taken from the blog: http://scn.sap.com/docs/DOC-53210

1.jpg

But in our system when we create DSO we get the following screen which doesn’t contain the structure section.

 

2.jpg

 

Does anyone know how can we create field based DSO?

I only succeeded doing it from the BW perspective in HANA studio.

Thanks,

Amir 

How to create Composite provider from BW workspace

0
0

Hi Experts,

 

Can anyone tell me how to create a composite provider from BW workspace i.e., t-code RSWSP?

 

I'm able to create a composite provider (by joining central & local provider defined in BW workspace) through t-code "RSLIMOBW". However the already created composite provider is not available/linked with the BW workspace under Composite provider tab.

 

Appreciate your response.

 

Thank you in advance.

 

Regards,

Karthik

Viewing all 811 articles
Browse latest View live




Latest Images